姓名: |
刘帅领 |


|
性别: |
男 |
职称: |
讲师 |
职务: |
无 |
专业: |
动力工程及工程热物理(制冷与低温工程方向) |
导师情况: |
无 |
所在机构: |
建筑环境与能源应用工程 |
办公地点: |
十大娱乐平台大全网站
1号实验楼420室 |
邮箱: |
[email protected] |
办公电话: |
|
主要经历: |
2013.09~2017.07,河北建筑工程娱乐平台大全
,本科 |
2017.09~2020.07,北京工业大学,硕士 |
2020.09~2023.07,北京工业大学,博士 |
2023.09~至今,十大娱乐平台大全网站
,讲师 |
主要研究方向: |
1、建筑排风余热回收 |
2、热泵干燥 |
3、数据中心冷却 |
主要讲授课程: |
1、热质交换原理与设备 |
2、建筑工程制图 |
3、建筑环境概论 |
主要科研项目: |
参与的主要纵向项目: |
1、国家自然科学基金(面上),热泵复合泵驱动热管全年冷却系统的机理与特性研究,2018/01~2021/12 |
2、国家重点研发计划子课题,制冷量能效量值传递标准器的研制,2018/07~2021/12 |
参与的主要横向项目: |
1、 广东美芝制冷设备有限公司, 双吸/排气压缩机及系统应用开发, 2023/12 ~ 2025/03 |
2、珠海格力电器股份有限公司,数据中心用气泵驱动复合热管全年冷却系统关键技术研究,2021/09 ~ 2023/09 |
代表性成果: |
代表性期刊论文: |
1、 Liu S, Ma G, Li X, et al. Experimental investigation and application potential analysis of vapor compression refrigeration integrated mechanically-driven loop heat pipe for data centers cooling[J]. Applied Thermal Engineering, 2025, 259: 124958. |
2、Liu S, Ma G, Jiang Y, et al. Performance evaluation and optimization of a novel heat pump clothes dryer with ESD-compressor[J]. International Communications in Heat and Mass Transfer, 2024, 157: 107798. |
3、 Liu S, Ma G, Lv Y, et al. Review on heat pump energy recovery technologies and their integrated systems for building ventilation[J]. Building and Environment, 2023: 111067. |
4、Liu S, Ma G, Jia X, et al. The thermal performance and applicability analysis of the composite ventilation system with heat recovery in Ultra-low energy buildings [J]. Energy, 2023, 263: 125942. |
5、 Liu S, Ma G, Jia X, et al. Experimental study on performance of mechanically-driven loop heat pipe heat recovery system[J]. Applied Thermal Engineering, 2022, 207: 118066. |
6、 Liu S, Ma G, Xu S, et al. Experimental study of ventilation system with heat recovery integrated by pump-driven loop heat pipe and heat pump[J]. Journal of Building Engineering, 2022, 52: 104404. |
7、刘帅领,马国远,许树学,等.换气热回收用泵驱动热管系统工作特性模拟[J].北京工业大学学报,2023,49(01):53-61. |
8、刘帅领,马国远,许树学,等.蒸发器冷冻除湿特性模拟分析与优化研究[J].制冷学报,2020,41(02):15-21+69. |
代表性专利: |
1、一种全年冷却用空气制冷系统及其冷量调节方法, 发明专利 202110669112.6,2023 |